Portable AC comparisons

Hisense AP1022TW1GD vs AP1022HW1GD: cooling-only or heat pump?

The Hisense AP1022TW1GD and AP1022HW1GD are close enough in name and capacity to invite an accidental suffix mistake, but they serve different needs. Both are listed at 10,000 BTU/h SACC, both use two exhaust ducts, and both have a manufacturer room-area estimate up to 550 square feet. The TW1GD is a cooling-only inverter model; the HW1GD adds a heat-pump mode. Compare the exact model code, rather than treating the shared cabinet and manual as proof that either configuration does everything.

Same cooling tier, distinct feature sets

Hisense lists the TW1GD with Cool, Dehumidify and Fan operation, ConnectLife app control and a remote. Its Release sheet lists inverter technology, a washable filter and a two-year parts-and-labor term. The HW1GD's exact product page and sheet document four modes, including Heat. That extra mode is the decisive functional difference: if a portable appliance must heat as well as cool, the TW1GD does not satisfy the requirement. If you only need cooling and prefer the lighter listed configuration, the TW1GD's kit-included weight is 69.9 pounds compared with 80 pounds for the HW1GD.

The 550-square-foot figure is a manufacturer estimate, not a room-load guarantee. Sun exposure, ceiling height, insulation and connected rooms matter. Neither code should be chosen by the room-area headline alone. If your stated minimum is 12,000 BTU/h SACC, both 10,000-SACC configurations miss it; consider a higher-capacity model rather than assuming Heat mode increases the cooling rating.

Installation is broadly similar

The model-specific sheets list two 5.9-inch ducts, each 59 inches long. For either unit, check that both ducts reach the included panel without obstructing airflow and that the slider orientation matches the documented range: 25–50 inches for vertical sliders, or 18–50 inches for horizontal sliders. The shared family manual recommends at least 20 inches of free air space on all sides, warns against extending a hose beyond nine feet and recommends two or more people for moving and installation. Those practical requirements can matter more than a small difference in cabinet depth.

The TW1GD is listed at 17.40 × 28.27 × 14.69 inches; the HW1GD has the same listed cabinet dimensions. Their weights differ in the exact sheets: 69.9 pounds for the TW1GD with kits included and 80 pounds for the HW1GD with kits included. The manual requires a grounded three-prong outlet on a 15-amp time-delay circuit and says not to use an adapter or extension cord. Measure the window, outlet and available clearance before delivery.

Drain and timer claims need model-level checks

Hisense calls the TW1GD drain-free, and its exact source lists no heat mode. The shared manual still says to drain a non-heating model before storage and includes a full-container warning. A built-in lift pump or permanent gravity-drain path is not confirmed for the TW1GD. The HW1GD is different in Heat: the manual includes a heat-pump drain hose and directs the user to connect it for heating. Do not transfer that hose requirement—or a claim that heat can run without it—to the cooling-only TW1GD.

Timer support is not clear for either configuration. The TW1GD's older official sheet marks Timer YES while the later Release sheet says NO; the HW1GD Release sheet also conflicts with timer functions in the shared manual. If scheduled start or stop is essential, ask Hisense to confirm the controller supplied with the exact SKU. Likewise, the TW1GD's sheet CEER value is not the same as an EnergyGuide check: its exact label values remain unverified here.

Choose by actual need

• Choose AP1022TW1GD if you want 10,000-SACC cooling, the dual-duct layout, app control and the lower listed kit-included weight, and have no essential heat requirement.
• Choose AP1022HW1GD only if heat-pump operation is useful and you can route the required drain hose during Heat operation; heat output and low-ambient limits remain unverified here.
• Reject both if you require one exhaust hose, a verified EnergyGuide threshold, a confirmed timer, a pump, a window opening outside the listed range or a higher SACC tier.

Both sheets list a two-year parts-and-labor term, but that duration alone does not define every warranty condition. Compare the exact model label, included duct kit and current manufacturer instructions before ordering; current directory status does not guarantee stock or price.

Sources: Hisense’s separate AP1022TW1GD page and AP1022HW1GD page, each exact model specification sheet, and the shared family manual. The manual cover has a generic model field; its metadata names both codes and the exact pages/sheets establish which capabilities belong to which configuration.